Enviro-Safe Industrial Concentrate Rust Remover

• Available in one-gallon SHOOTERS, makes 1.25 to 2.5 gallons by adding your water
• Non-Hazardous
• Very Economical to Use because its concentrated...
• Safe and Easy to Use- Just soak parts at room temperature
• Removes  light to severe rust from rusted parts
• Based on Chelant Technology using a new breakthrough chelant formulation
• We don't use sulfur-based chemicals in our rust remover
• Our new formulation works much more efficiently compared to the competitors.
• 10% concentration of our Industrial Concentrate is equivalent to our competitor's products
• pH 6-7

• No VOC's
• Does not harm most plastics, rubbers, and paints
• Designed for Immersion or Continuous Spray Applications
• Brightens Copper, Brass and similar alloys
• Removes Gun Bluing and most black oxides
• Removes Plating from Galvanized Surfaces
• Can Be Reused Over and Over
• Use at room temperature or heated up to 120 F to 150 F to accelerate removal rates
• Environmentally Friendly And Safe to Use
• Industrial Quality
• Very Stable and is Freeze/Thaw Stable- not recommended to be frozen but can be thawed and used
• Colorless Solution, no dyes that may stain some metals
• 10% solution can be used as a rust inhibitor when applied after removing rust and rinsing

Cost: 1-gallon of Enviro-Safe is $42.25/gallon, makes up to 10-gallons.  1-quart Shooters are $17.50, makes up to 2.5 gallons

Mixing (Light to Heavy rust):  Mixed at 10% (equal to the competitors in rust removal strength) makes 10-gallons and is only $5.95/gallon.

Mixing (Light to Severe rust): You can also mix it up at 20% and it would be 3X as strong as the competitors, makes 5-gallons and is only $11.90/gallon.  Typically, twice the concentration, twice the strength, but not in this case.  Its 3x as strong, a synergistic effect.

Save on Shipping: You will also save on shipping. You would have to buy 10-gallons of the competitors product to our 1-gallon of Industrial Concentrate. Would you rather ship 10-gallons or 1-gallon?

• Grinding
• Abrasives
• Wire Wheels
• Sand Blasting
• Acids
• Time Consuming Labor

1. Pour SHOOTER solution into a 1-GALLON stainless steel, glass or chemical resistant plastic container. (rinsed milk jugs work well..)

2. Add water into empty SHOOTER bottle and pour into 1-gallon container (repeat 3 times to fill 1-gallon container)

3. Immerse part into Enviro-Safe solution or continuously spray part using the Enviro-Safe solution

         [Optional] Heat solution up to 150 F. max. to accelerate rust removal

4. Allow part to soak until rust is removed.

5. Remover part and rinse.  If black residue is evident, wash off using Metal Cleaner 0001.  A light scrub may help.

Determine the concentration that you will be using, 10% or 20%.

• Use 10% for light to medium rust removal applications, especially for one time use.
• Use 20% for light to severe rusted parts, especially if you want to re-use solution.

1. Find a large stainless steel, glass or chemical resistant plastic container to immerse your parts into.

2. Mix concentrate and water in correct proportions, see below for easy method of measuring.

• 10% concentrate: Find a measuring cup, small can or bottle and fill up to top or line on the container with concentrate. Pour into larger container. Refill with water up to same line and pour into large container, repeat with water 8 more times.(total of 1 container of concentrate and 9 containers of water).
• 20% concentrate: Repeat same procedure as above but only refill with water 4 times.(total of 1 container of concentrate and 4 containers of water)

          [Optional] Heat solution up to 150 F. max. to accelerate rust removal

3. Immerse parts into container and remove when rust has been removed. Check a few time to determine time needed.

4. Remover part and rinse.  If black residue is evident, wash off using Metal Cleaner 0001.  A light scrub may help.

• We also support our customers with a concentrate version of the rust remover.  This greatly saves in transportation costs and storage issues.
• Easily mixes with water.  Using quality water is recommended but not necessary
• Mix up concentrate with water at recommended concentrations.
• Use 10% for light rust or one time use.
•  Use 20% for medium to heavy rust or for re use over and over.
• Example:  for light rust, mix 1 part concentrate into 9 parts water.
• Concentrate mixes easily with water, simply stir.
• Safe to use on most plastics, rubbers and paint
• Works on steels, cast irons, copper, bronze, and more.
• Does not work well on stainless steel.   The passivation layer on the stainless resists the chelants.
• Call if you have any questions on materials to use on or incompatibility concerns..

• Completely removes all the rust, even in intricate areas, hard to get to spaces, etc.
• Contain NO Phosphoric Acids or Caustic Chemicals
• You don't have to worry about hydrogen embrittlement with chelant technology
• Powerful rust removal that was developed using breakthrough technology that safely and effectively removes oxidation. Initially developed for industrial applications and now available for anyone.
• The safer alternative to traditional and hazardous rust removers. It easily dissolves rust from steel, cast iron, copper and other corroded alloys leaving a rust free surface ready to paint or otherwise finish.